PEP 253 – Subtyping Built-in Types
- Author:
- Guido van Rossum <guido at python.org>
- Status:
- Final
- Type:
- Standards Track
- Created:
- 14-May-2001
- Python-Version:
- 2.2
- Post-History:
Table of Contents
Abstract
This PEP proposes additions to the type object API that will allow the creation of subtypes of built-in types, in C and in Python.
[Editor’s note: the ideas described in this PEP have been incorporated into Python. The PEP no longer accurately describes the implementation.]
Introduction
Traditionally, types in Python have been created statically, by declaring a global variable of type PyTypeObject and initializing it with a static initializer. The slots in the type object describe all aspects of a Python type that are relevant to the Python interpreter. A few slots contain dimensional information (like the basic allocation size of instances), others contain various flags, but most slots are pointers to functions to implement various kinds of behaviors. A NULL pointer means that the type does not implement the specific behavior; in that case the system may provide a default behavior or raise an exception when the behavior is invoked for an instance of the type. Some collections of function pointers that are usually defined together are obtained indirectly via a pointer to an additional structure containing more function pointers.
While the details of initializing a PyTypeObject structure haven’t been documented as such, they are easily gleaned from the examples in the source code, and I am assuming that the reader is sufficiently familiar with the traditional way of creating new Python types in C.
This PEP will introduce the following features:
- a type can be a factory function for its instances
- types can be subtyped in C
- types can be subtyped in Python with the class statement
- multiple inheritance from types is supported (insofar as practical – you still can’t multiply inherit from list and dictionary)
- the standard coercion functions (int, tuple, str etc.) will be redefined to be the corresponding type objects, which serve as their own factory functions
- a class statement can contain a
__metaclass__
declaration, specifying the metaclass to be used to create the new class - a class statement can contain a
__slots__
declaration, specifying the specific names of the instance variables supported
This PEP builds on PEP 252, which adds standard introspection to
types; for example, when a particular type object initializes the
tp_hash
slot, that type object has a __hash__
method when
introspected. PEP 252 also adds a dictionary to type objects
which contains all methods. At the Python level, this dictionary
is read-only for built-in types; at the C level, it is accessible
directly (but it should not be modified except as part of
initialization).
For binary compatibility, a flag bit in the tp_flags slot
indicates the existence of the various new slots in the type
object introduced below. Types that don’t have the
Py_TPFLAGS_HAVE_CLASS
bit set in their tp_flags
slot are assumed
to have NULL values for all the subtyping slots. (Warning: the
current implementation prototype is not yet consistent in its
checking of this flag bit. This should be fixed before the final
release.)
In current Python, a distinction is made between types and
classes. This PEP together with PEP 254 will remove that
distinction. However, for backwards compatibility the distinction
will probably remain for years to come, and without PEP 254, the
distinction is still large: types ultimately have a built-in type
as a base class, while classes ultimately derive from a
user-defined class. Therefore, in the rest of this PEP, I will
use the word type whenever I can – including base type or
supertype, derived type or subtype, and metatype. However,
sometimes the terminology necessarily blends, for example an
object’s type is given by its __class__
attribute, and subtyping
in Python is spelled with a class statement. If further
distinction is necessary, user-defined classes can be referred to
as “classic” classes.
About metatypes
Inevitably the discussion comes to metatypes (or metaclasses). Metatypes are nothing new in Python: Python has always been able to talk about the type of a type:
>>> a = 0
>>> type(a)
<type 'int'>
>>> type(type(a))
<type 'type'>
>>> type(type(type(a)))
<type 'type'>
>>>
In this example, type(a)
is a “regular” type, and type(type(a))
is
a metatype. While as distributed all types have the same metatype
(PyType_Type
, which is also its own metatype), this is not a
requirement, and in fact a useful and relevant 3rd party extension
(ExtensionClasses by Jim Fulton) creates an additional metatype.
The type of classic classes, known as types.ClassType
, can also be
considered a distinct metatype.
A feature closely connected to metatypes is the “Don Beaudry
hook”, which says that if a metatype is callable, its instances
(which are regular types) can be subclassed (really subtyped)
using a Python class statement. I will use this rule to support
subtyping of built-in types, and in fact it greatly simplifies the
logic of class creation to always simply call the metatype. When
no base class is specified, a default metatype is called – the
default metatype is the “ClassType” object, so the class statement
will behave as before in the normal case. (This default can be
changed per module by setting the global variable __metaclass__
.)
Python uses the concept of metatypes or metaclasses in a different way than Smalltalk. In Smalltalk-80, there is a hierarchy of metaclasses that mirrors the hierarchy of regular classes, metaclasses map 1-1 to classes (except for some funny business at the root of the hierarchy), and each class statement creates both a regular class and its metaclass, putting class methods in the metaclass and instance methods in the regular class.
Nice though this may be in the context of Smalltalk, it’s not compatible with the traditional use of metatypes in Python, and I prefer to continue in the Python way. This means that Python metatypes are typically written in C, and may be shared between many regular types. (It will be possible to subtype metatypes in Python, so it won’t be absolutely necessary to write C to use metatypes; but the power of Python metatypes will be limited. For example, Python code will never be allowed to allocate raw memory and initialize it at will.)
Metatypes determine various policies for types, such as what
happens when a type is called, how dynamic types are (whether a
type’s __dict__
can be modified after it is created), what the
method resolution order is, how instance attributes are looked
up, and so on.
I’ll argue that left-to-right depth-first is not the best solution when you want to get the most use from multiple inheritance.
I’ll argue that with multiple inheritance, the metatype of the subtype must be a descendant of the metatypes of all base types.
I’ll come back to metatypes later.
Making a type a factory for its instances
Traditionally, for each type there is at least one C factory
function that creates instances of the type (PyTuple_New()
,
PyInt_FromLong()
and so on). These factory functions take care of
both allocating memory for the object and initializing that
memory. As of Python 2.0, they also have to interface with the
garbage collection subsystem, if the type chooses to participate
in garbage collection (which is optional, but strongly recommended
for so-called “container” types: types that may contain references
to other objects, and hence may participate in reference cycles).
In this proposal, type objects can be factory functions for their instances, making the types directly callable from Python. This mimics the way classes are instantiated. The C APIs for creating instances of various built-in types will remain valid and in some cases more efficient. Not all types will become their own factory functions.
The type object has a new slot, tp_new, which can act as a factory
for instances of the type. Types are now callable, because the
tp_call slot is set in PyType_Type
(the metatype); the function
looks for the tp_new slot of the type that is being called.
Explanation: the tp_call
slot of a regular type object (such as
PyInt_Type
or PyList_Type
) defines what happens when instances
of that type are called; in particular, the tp_call
slot in the
function type, PyFunction_Type
, is the key to making functions
callable. As another example, PyInt_Type.tp_call
is NULL
, because
integers are not callable. The new paradigm makes type objects
callable. Since type objects are instances of their metatype
(PyType_Type
), the metatype’s tp_call
slot (PyType_Type.tp_call
)
points to a function that is invoked when any type object is
called. Now, since each type has to do something different to
create an instance of itself, PyType_Type.tp_call
immediately
defers to the tp_new
slot of the type that is being called.
PyType_Type
itself is also callable: its tp_new
slot creates a new
type. This is used by the class statement (formalizing the Don
Beaudry hook, see above). And what makes PyType_Type
callable?
The tp_call
slot of its metatype – but since it is its own
metatype, that is its own tp_call
slot!
If the type’s tp_new
slot is NULL, an exception is raised.
Otherwise, the tp_new slot is called. The signature for the
tp_new
slot is
PyObject *tp_new(PyTypeObject *type,
PyObject *args,
PyObject *kwds)
where ‘type’ is the type whose tp_new
slot is called, and ‘args’
and ‘kwds’ are the sequential and keyword arguments to the call,
passed unchanged from tp_call. (The ‘type’ argument is used in
combination with inheritance, see below.)
There are no constraints on the object type that is returned, although by convention it should be an instance of the given type. It is not necessary that a new object is returned; a reference to an existing object is fine too. The return value should always be a new reference, owned by the caller.
Once the tp_new
slot has returned an object, further initialization
is attempted by calling the tp_init()
slot of the resulting
object’s type, if not NULL. This has the following signature:
int tp_init(PyObject *self,
PyObject *args,
PyObject *kwds)
It corresponds more closely to the __init__()
method of classic
classes, and in fact is mapped to that by the slot/special-method
correspondence rules. The difference in responsibilities between
the tp_new()
slot and the tp_init()
slot lies in the invariants
they ensure. The tp_new()
slot should ensure only the most
essential invariants, without which the C code that implements the
objects would break. The tp_init()
slot should be used for
overridable user-specific initializations. Take for example the
dictionary type. The implementation has an internal pointer to a
hash table which should never be NULL. This invariant is taken
care of by the tp_new()
slot for dictionaries. The dictionary
tp_init()
slot, on the other hand, could be used to give the
dictionary an initial set of keys and values based on the
arguments passed in.
Note that for immutable object types, the initialization cannot be
done by the tp_init()
slot: this would provide the Python user
with a way to change the initialization. Therefore, immutable
objects typically have an empty tp_init()
implementation and do
all their initialization in their tp_new()
slot.
You may wonder why the tp_new()
slot shouldn’t call the tp_init()
slot itself. The reason is that in certain circumstances (like
support for persistent objects), it is important to be able to
create an object of a particular type without initializing it any
further than necessary. This may conveniently be done by calling
the tp_new()
slot without calling tp_init()
. It is also possible
that tp_init()
is not called, or called more than once – its
operation should be robust even in these anomalous cases.
For some objects, tp_new()
may return an existing object. For
example, the factory function for integers caches the integers -1
through 99. This is permissible only when the type argument to
tp_new()
is the type that defined the tp_new()
function (in the
example, if type == &PyInt_Type
), and when the tp_init()
slot for
this type does nothing. If the type argument differs, the
tp_new()
call is initiated by a derived type’s tp_new()
to
create the object and initialize the base type portion of the
object; in this case tp_new()
should always return a new object
(or raise an exception).
Both tp_new()
and tp_init()
should receive exactly the same ‘args’
and ‘kwds’ arguments, and both should check that the arguments are
acceptable, because they may be called independently.
There’s a third slot related to object creation: tp_alloc()
. Its
responsibility is to allocate the memory for the object,
initialize the reference count (ob_refcnt
) and the type pointer
(ob_type
), and initialize the rest of the object to all zeros. It
should also register the object with the garbage collection
subsystem if the type supports garbage collection. This slot
exists so that derived types can override the memory allocation
policy (like which heap is being used) separately from the
initialization code. The signature is:
PyObject *tp_alloc(PyTypeObject *type, int nitems)
The type argument is the type of the new object. The nitems argument is normally zero, except for objects with a variable allocation size (basically strings, tuples, and longs). The allocation size is given by the following expression:
type->tp_basicsize + nitems * type->tp_itemsize
The tp_alloc
slot is only used for subclassable types. The tp_new()
function of the base class must call the tp_alloc()
slot of the
type passed in as its first argument. It is the tp_new()
function’s responsibility to calculate the number of items. The
tp_alloc()
slot will set the ob_size member of the new object if
the type->tp_itemsize
member is nonzero.
(Note: in certain debugging compilation modes, the type structure
used to have members named tp_alloc
and a tp_free
slot already,
counters for the number of allocations and deallocations. These
are renamed to tp_allocs
and tp_deallocs
.)
Standard implementations for tp_alloc()
and tp_new()
are
available. PyType_GenericAlloc()
allocates an object from the
standard heap and initializes it properly. It uses the above
formula to determine the amount of memory to allocate, and takes
care of GC registration. The only reason not to use this
implementation would be to allocate objects from a different heap
(as is done by some very small frequently used objects like ints
and tuples). PyType_GenericNew()
adds very little: it just calls
the type’s tp_alloc()
slot with zero for nitems. But for mutable
types that do all their initialization in their tp_init()
slot,
this may be just the ticket.
Preparing a type for subtyping
The idea behind subtyping is very similar to that of single inheritance in C++. A base type is described by a structure declaration (similar to the C++ class declaration) plus a type object (similar to the C++ vtable). A derived type can extend the structure (but must leave the names, order and type of the members of the base structure unchanged) and can override certain slots in the type object, leaving others the same. (Unlike C++ vtables, all Python type objects have the same memory layout.)
The base type must do the following:
- Add the flag value
Py_TPFLAGS_BASETYPE
totp_flags
. - Declare and use
tp_new()
,tp_alloc()
and optionaltp_init()
slots. - Declare and use
tp_dealloc()
andtp_free()
. - Export its object structure declaration.
- Export a subtyping-aware type-checking macro.
The requirements and signatures for tp_new()
, tp_alloc()
and
tp_init()
have already been discussed above: tp_alloc()
should
allocate the memory and initialize it to mostly zeros; tp_new()
should call the tp_alloc()
slot and then proceed to do the
minimally required initialization; tp_init()
should be used for
more extensive initialization of mutable objects.
It should come as no surprise that there are similar conventions
at the end of an object’s lifetime. The slots involved are
tp_dealloc()
(familiar to all who have ever implemented a Python
extension type) and tp_free()
, the new kid on the block. (The
names aren’t quite symmetric; tp_free()
corresponds to tp_alloc()
,
which is fine, but tp_dealloc()
corresponds to tp_new()
. Maybe
the tp_dealloc slot should be renamed?)
The tp_free()
slot should be used to free the memory and
unregister the object with the garbage collection subsystem, and
can be overridden by a derived class; tp_dealloc()
should
deinitialize the object (usually by calling Py_XDECREF()
for
various sub-objects) and then call tp_free()
to deallocate the
memory. The signature for tp_dealloc()
is the same as it always
was:
void tp_dealloc(PyObject *object)
The signature for tp_free() is the same:
void tp_free(PyObject *object)
(In a previous version of this PEP, there was also a role reserved
for the tp_clear()
slot. This turned out to be a bad idea.)
To be usefully subtyped in C, a type must export the structure declaration for its instances through a header file, as it is needed to derive a subtype. The type object for the base type must also be exported.
If the base type has a type-checking macro (like PyDict_Check()
),
this macro should be made to recognize subtypes. This can be done
by using the new PyObject_TypeCheck(object, type)
macro, which
calls a function that follows the base class links.
The PyObject_TypeCheck()
macro contains a slight optimization: it
first compares object->ob_type
directly to the type argument, and
if this is a match, bypasses the function call. This should make
it fast enough for most situations.
Note that this change in the type-checking macro means that C
functions that require an instance of the base type may be invoked
with instances of the derived type. Before enabling subtyping of
a particular type, its code should be checked to make sure that
this won’t break anything. It has proved useful in the prototype
to add another type-checking macro for the built-in Python object
types, to check for exact type match too (for example,
PyDict_Check(x)
is true if x is an instance of dictionary or of a
dictionary subclass, while PyDict_CheckExact(x)
is true only if x
is a dictionary).
Creating a subtype of a built-in type in C
The simplest form of subtyping is subtyping in C. It is the simplest form because we can require the C code to be aware of some of the problems, and it’s acceptable for C code that doesn’t follow the rules to dump core. For added simplicity, it is limited to single inheritance.
Let’s assume we’re deriving from a mutable base type whose tp_itemsize is zero. The subtype code is not GC-aware, although it may inherit GC-awareness from the base type (this is automatic). The base type’s allocation uses the standard heap.
The derived type begins by declaring a type structure which contains the base type’s structure. For example, here’s the type structure for a subtype of the built-in list type:
typedef struct {
PyListObject list;
int state;
} spamlistobject;
Note that the base type structure member (here PyListObject
) must
be the first member of the structure; any following members are
additions. Also note that the base type is not referenced via a
pointer; the actual contents of its structure must be included!
(The goal is for the memory layout of the beginning of the
subtype instance to be the same as that of the base type
instance.)
Next, the derived type must declare a type object and initialize it. Most of the slots in the type object may be initialized to zero, which is a signal that the base type slot must be copied into it. Some slots that must be initialized properly:
- The object header must be filled in as usual; the type should
be
&PyType_Type
. - The tp_basicsize slot must be set to the size of the subtype
instance struct (in the above example:
sizeof(spamlistobject)
). - The tp_base slot must be set to the address of the base type’s type object.
- If the derived slot defines any pointer members, the
tp_dealloc
slot function requires special attention, see below; otherwise, it can be set to zero, to inherit the base type’s deallocation function. - The
tp_flags
slot must be set to the usualPy_TPFLAGS_DEFAULT
value. - The
tp_name
slot must be set; it is recommended to settp_doc
as well (these are not inherited).
If the subtype defines no additional structure members (it only
defines new behavior, no new data), the tp_basicsize
and the
tp_dealloc
slots may be left set to zero.
The subtype’s tp_dealloc
slot deserves special attention. If the
derived type defines no additional pointer members that need to be
DECREF’ed or freed when the object is deallocated, it can be set
to zero. Otherwise, the subtype’s tp_dealloc()
function must call
Py_XDECREF()
for any PyObject *
members and the correct memory
freeing function for any other pointers it owns, and then call the
base class’s tp_dealloc()
slot. This call has to be made via the
base type’s type structure, for example, when deriving from the
standard list type:
PyList_Type.tp_dealloc(self);
If the subtype wants to use a different allocation heap than the
base type, the subtype must override both the tp_alloc()
and the
tp_free()
slots. These will be called by the base class’s
tp_new()
and tp_dealloc()
slots, respectively.
To complete the initialization of the type, PyType_InitDict()
must
be called. This replaces slots initialized to zero in the subtype
with the value of the corresponding base type slots. (It also
fills in tp_dict
, the type’s dictionary, and does various other
initializations necessary for type objects.)
A subtype is not usable until PyType_InitDict()
is called for it;
this is best done during module initialization, assuming the
subtype belongs to a module. An alternative for subtypes added to
the Python core (which don’t live in a particular module) would be
to initialize the subtype in their constructor function. It is
allowed to call PyType_InitDict()
more than once; the second and
further calls have no effect. To avoid unnecessary calls, a test
for tp_dict==NULL
can be made.
(During initialization of the Python interpreter, some types are
actually used before they are initialized. As long as the slots
that are actually needed are initialized, especially tp_dealloc
,
this works, but it is fragile and not recommended as a general
practice.)
To create a subtype instance, the subtype’s tp_new()
slot is
called. This should first call the base type’s tp_new()
slot and
then initialize the subtype’s additional data members. To further
initialize the instance, the tp_init()
slot is typically called.
Note that the tp_new()
slot should not call the tp_init()
slot;
this is up to tp_new()
’s caller (typically a factory function).
There are circumstances where it is appropriate not to call
tp_init()
.
If a subtype defines a tp_init()
slot, the tp_init()
slot should
normally first call the base type’s tp_init()
slot.
(XXX There should be a paragraph or two about argument passing here.)
Subtyping in Python
The next step is to allow subtyping of selected built-in types through a class statement in Python. Limiting ourselves to single inheritance for now, here is what happens for a simple class statement:
class C(B):
var1 = 1
def method1(self): pass
# etc.
The body of the class statement is executed in a fresh environment (basically, a new dictionary used as local namespace), and then C is created. The following explains how C is created.
Assume B is a type object. Since type objects are objects, and
every object has a type, B has a type. Since B is itself a type,
we also call its type its metatype. B’s metatype is accessible
via type(B)
or B.__class__
(the latter notation is new for types;
it is introduced in PEP 252). Let’s say this metatype is M (for
Metatype). The class statement will create a new type, C. Since
C will be a type object just like B, we view the creation of C as
an instantiation of the metatype, M. The information that needs
to be provided for the creation of a subclass is:
- its name (in this example the string “C”);
- its bases (a singleton tuple containing B);
- the results of executing the class body, in the form of a
dictionary (for example
{"var1": 1, "method1": <functionmethod1 at ...>, ...}
).
The class statement will result in the following call:
C = M("C", (B,), dict)
where dict is the dictionary resulting from execution of the class body. In other words, the metatype (M) is called.
Note that even though the example has only one base, we still pass in a (singleton) sequence of bases; this makes the interface uniform with the multiple-inheritance case.
In current Python, this is called the “Don Beaudry hook” after its
inventor; it is an exceptional case that is only invoked when a
base class is not a regular class. For a regular base class (or
when no base class is specified), current Python calls
PyClass_New()
, the C level factory function for classes, directly.
Under the new system this is changed so that Python always
determines a metatype and calls it as given above. When one or
more bases are given, the type of the first base is used as the
metatype; when no base is given, a default metatype is chosen. By
setting the default metatype to PyClass_Type
, the metatype of
“classic” classes, the classic behavior of the class statement is
retained. This default can be changed per module by setting the
global variable __metaclass__
.
There are two further refinements here. First, a useful feature
is to be able to specify a metatype directly. If the class
suite defines a variable __metaclass__
, that is the metatype
to call. (Note that setting __metaclass__
at the module level
only affects class statements without a base class and without an
explicit __metaclass__
declaration; but setting __metaclass__
in a
class suite overrides the default metatype unconditionally.)
Second, with multiple bases, not all bases need to have the same metatype. This is called a metaclass conflict [1]. Some metaclass conflicts can be resolved by searching through the set of bases for a metatype that derives from all other given metatypes. If such a metatype cannot be found, an exception is raised and the class statement fails.
This conflict resolution can be implemented by the metatype
constructors: the class statement just calls the metatype of the first
base (or that specified by the __metaclass__
variable), and this
metatype’s constructor looks for the most derived metatype. If
that is itself, it proceeds; otherwise, it calls that metatype’s
constructor. (Ultimate flexibility: another metatype might choose
to require that all bases have the same metatype, or that there’s
only one base class, or whatever.)
(In [1], a new metaclass is automatically derived that is a
subclass of all given metaclasses. But since it is questionable
in Python how conflicting method definitions of the various
metaclasses should be merged, I don’t think this is feasible.
Should the need arise, the user can derive such a metaclass
manually and specify it using the __metaclass__
variable. It is
also possible to have a new metaclass that does this.)
Note that calling M requires that M itself has a type: the
meta-metatype. And the meta-metatype has a type, the
meta-meta-metatype. And so on. This is normally cut short at
some level by making a metatype be its own metatype. This is
indeed what happens in Python: the ob_type
reference in
PyType_Type
is set to &PyType_Type
. In the absence of third party
metatypes, PyType_Type
is the only metatype in the Python
interpreter.
(In a previous version of this PEP, there was one additional meta-level, and there was a meta-metatype called “turtle”. This turned out to be unnecessary.)
In any case, the work for creating C is done by M’s tp_new()
slot.
It allocates space for an “extended” type structure, containing:
the type object; the auxiliary structures (as_sequence etc.); the
string object containing the type name (to ensure that this object
isn’t deallocated while the type object is still referencing it); and
some auxiliary storage (to be described later). It initializes this
storage to zeros except for a few crucial slots (for example, tp_name
is set to point to the type name) and then sets the tp_base slot to
point to B. Then PyType_InitDict()
is called to inherit B’s slots.
Finally, C’s tp_dict
slot is updated with the contents of the
namespace dictionary (the third argument to the call to M).
Multiple inheritance
The Python class statement supports multiple inheritance, and we will also support multiple inheritance involving built-in types.
However, there are some restrictions. The C runtime architecture doesn’t make it feasible to have a meaningful subtype of two different built-in types except in a few degenerate cases. Changing the C runtime to support fully general multiple inheritance would be too much of an upheaval of the code base.
The main problem with multiple inheritance from different built-in types stems from the fact that the C implementation of built-in types accesses structure members directly; the C compiler generates an offset relative to the object pointer and that’s that. For example, the list and dictionary type structures each declare a number of different but overlapping structure members. A C function accessing an object expecting a list won’t work when passed a dictionary, and vice versa, and there’s not much we could do about this without rewriting all code that accesses lists and dictionaries. This would be too much work, so we won’t do this.
The problem with multiple inheritance is caused by conflicting structure member allocations. Classes defined in Python normally don’t store their instance variables in structure members: they are stored in an instance dictionary. This is the key to a partial solution. Suppose we have the following two classes:
class A(dictionary):
def foo(self): pass
class B(dictionary):
def bar(self): pass
class C(A, B): pass
(Here, ‘dictionary’ is the type of built-in dictionary objects,
a.k.a. type({})
or {}.__class__
or types.DictType
.) If we look at
the structure layout, we find that an A instance has the layout
of a dictionary followed by the __dict__
pointer, and a B instance
has the same layout; since there are no structure member layout
conflicts, this is okay.
Here’s another example:
class X(object):
def foo(self): pass
class Y(dictionary):
def bar(self): pass
class Z(X, Y): pass
(Here, ‘object’ is the base for all built-in types; its structure
layout only contains the ob_refcnt
and ob_type
members.) This
example is more complicated, because the __dict__
pointer for X
instances has a different offset than that for Y instances. Where
is the __dict__
pointer for Z instances? The answer is that the
offset for the __dict__
pointer is not hardcoded, it is stored in
the type object.
Suppose on a particular machine an ‘object’ structure is 8 bytes
long, and a ‘dictionary’ struct is 60 bytes, and an object pointer
is 4 bytes. Then an X structure is 12 bytes (an object structure
followed by a __dict__
pointer), and a Y structure is 64 bytes (a
dictionary structure followed by a __dict__
pointer). The Z
structure has the same layout as the Y structure in this example.
Each type object (X, Y and Z) has a “__dict__ offset” which is
used to find the __dict__
pointer. Thus, the recipe for looking
up an instance variable is:
- get the type of the instance
- get the
__dict__
offset from the type object - add the
__dict__
offset to the instance pointer - look in the resulting address to find a dictionary reference
- look up the instance variable name in that dictionary
Of course, this recipe can only be implemented in C, and I have left out some details. But this allows us to use multiple inheritance patterns similar to the ones we can use with classic classes.
XXX I should write up the complete algorithm here to determine
base class compatibility, but I can’t be bothered right now. Look
at best_base()
in typeobject.c in the implementation mentioned
below.
MRO: Method resolution order (the lookup rule)
With multiple inheritance comes the question of method resolution order: the order in which a class or type and its bases are searched looking for a method of a given name.
In classic Python, the rule is given by the following recursive function, also known as the left-to-right depth-first rule:
def classic_lookup(cls, name):
if cls.__dict__.has_key(name):
return cls.__dict__[name]
for base in cls.__bases__:
try:
return classic_lookup(base, name)
except AttributeError:
pass
raise AttributeError, name
The problem with this becomes apparent when we consider a “diamond diagram”:
class A:
^ ^ def save(self): ...
/ \
/ \
/ \
/ \
class B class C:
^ ^ def save(self): ...
\ /
\ /
\ /
\ /
class D
Arrows point from a subtype to its base type(s)
. This particular
diagram means B and C derive from A, and D derives from B and C
(and hence also, indirectly, from A).
Assume that C overrides the method save()
, which is defined in the
base A. (C.save()
probably calls A.save()
and then saves some of
its own state.) B and D don’t override save()
. When we invoke
save()
on a D instance, which method is called? According to the
classic lookup rule, A.save()
is called, ignoring C.save()
!
This is not good. It probably breaks C (its state doesn’t get saved), defeating the whole purpose of inheriting from C in the first place.
Why was this not a problem in classic Python? Diamond diagrams are rarely found in classic Python class hierarchies. Most class hierarchies use single inheritance, and multiple inheritance is usually confined to mix-in classes. In fact, the problem shown here is probably the reason why multiple inheritance is unpopular in classic Python.
Why will this be a problem in the new system? The ‘object’ type
at the top of the type hierarchy defines a number of methods that
can usefully be extended by subtypes, for example __getattr__()
.
(Aside: in classic Python, the __getattr__()
method is not really
the implementation for the get-attribute operation; it is a hook
that only gets invoked when an attribute cannot be found by normal
means. This has often been cited as a shortcoming – some class
designs have a legitimate need for a __getattr__()
method that
gets called for all attribute references. But then of course
this method has to be able to invoke the default implementation
directly. The most natural way is to make the default
implementation available as object.__getattr__(self, name)
.)
Thus, a classic class hierarchy like this:
class B class C:
^ ^ def __getattr__(self, name): ...
\ /
\ /
\ /
\ /
class D
will change into a diamond diagram under the new system:
object:
^ ^ __getattr__()
/ \
/ \
/ \
/ \
class B class C:
^ ^ def __getattr__(self, name): ...
\ /
\ /
\ /
\ /
class D
and while in the original diagram C.__getattr__()
is invoked,
under the new system with the classic lookup rule,
object.__getattr__()
would be invoked!
Fortunately, there’s a lookup rule that’s better. It’s a bit difficult to explain, but it does the right thing in the diamond diagram, and it is the same as the classic lookup rule when there are no diamonds in the inheritance graph (when it is a tree).
The new lookup rule constructs a list of all classes in the inheritance diagram in the order in which they will be searched. This construction is done at class definition time to save time. To explain the new lookup rule, let’s first consider what such a list would look like for the classic lookup rule. Note that in the presence of diamonds the classic lookup visits some classes multiple times. For example, in the ABCD diamond diagram above, the classic lookup rule visits the classes in this order:
D, B, A, C, A
Note how A occurs twice in the list. The second occurrence is redundant, since anything that could be found there would already have been found when searching the first occurrence.
We use this observation to explain our new lookup rule. Using the classic lookup rule, construct the list of classes that would be searched, including duplicates. Now for each class that occurs in the list multiple times, remove all occurrences except for the last. The resulting list contains each ancestor class exactly once (including the most derived class, D in the example).
Searching for methods in this order will do the right thing for the diamond diagram. Because of the way the list is constructed, it does not change the search order in situations where no diamond is involved.
Isn’t this backwards incompatible? Won’t it break existing code? It would, if we changed the method resolution order for all classes. However, in Python 2.2, the new lookup rule will only be applied to types derived from built-in types, which is a new feature. Class statements without a base class create “classic classes”, and so do class statements whose base classes are themselves classic classes. For classic classes the classic lookup rule will be used. (To experiment with the new lookup rule for classic classes, you will be able to specify a different metaclass explicitly.) We’ll also provide a tool that analyzes a class hierarchy looking for methods that would be affected by a change in method resolution order.
XXX Another way to explain the motivation for the new MRO, due to Damian Conway: you never use the method defined in a base class if it is defined in a derived class that you haven’t explored yet (using the old search order).
XXX To be done
Additional topics to be discussed in this PEP:
- backwards compatibility issues!!!
- class methods and static methods
- cooperative methods and
super()
- mapping between type object slots (tp_foo) and special methods
(
__foo__
) (actually, this may belong in PEP 252) - built-in names for built-in types (object, int, str, list etc.)
__dict__
and__dictoffset__
__slots__
- the
HEAPTYPE
flag bit - GC support
- API docs for all the new functions
- how to use
__new__
- writing metaclasses (using
mro()
etc.) - high level user overview
open issues
- do we need
__del__
? - assignment to
__dict__
,__bases__
- inconsistent naming (e.g. tp_dealloc/tp_new/tp_init/tp_alloc/tp_free)
- add builtin alias ‘dict’ for ‘dictionary’?
- when subclasses of dict/list etc. are passed to system
functions, the
__getitem__
overrides (etc.) aren’t always used
Implementation
A prototype implementation of this PEP (and for PEP 252) is available from CVS, and in the series of Python 2.2 alpha and beta releases. For some examples of the features described here, see the file Lib/test/test_descr.py and the extension module Modules/xxsubtype.c.
References
Copyright
This document has been placed in the public domain.
Source: https://github.com/python/peps/blob/main/peps/pep-0253.rst
Last modified: 2023-09-09 17:39:29 GMT